Betekenis van:
mean distance

mean distance
Zelfstandig naamwoord
    • the arithmetic mean of the maximum and minimum distances of a celestial body (satellite or secondary star) from its primary

    Hyperoniemen

    Werkwoord

    mean distance
    een vervoeging van distance

    Voorbeeldzinnen

    1. A curious German word is "entfernen" (to put some distance between), because the prefix "ent-" means to take something away, in this case the distance, but taking away the distance would mean to bring it closer which is the exact opposite of what the word "entfernen" means.
    2. = weighted mean distance of the declared pillars in front of the centre of gravity of the vehicle.
    3. The performance prescribed for braking devices shall be based on the stopping distance and/or the mean fully developed deceleration.
    4. = weighted mean distance of the declared pillars to the rear of the centre of gravity of the vehicle.
    5. The mean fully developed deceleration, (dm), shall be calculated as the deceleration averaged with respect to distance over the interval vb to ve according to the following formula:
    6. ‘Mean fully developed deceleration (“mfdd”)’ means the average deceleration calculated on the basis of the measured distance recorded when decelerating a vehicle between two specified speeds.
    7. .3.3 the moment arm shall be the vertical distance from a point at one half of the mean draught corresponding to the intact condition to the centre of gravity of the lateral area.
    8. The performance of a braking device shall be determined by measuring the stopping distance in relation to the initial speed of the vehicle and/or measuring the mean fully developed deceleration during the test.
    9. The maximum mean utilisation of adhesion is shown by calculating the maximum mean adhesion (δ) from individual braking distances obtained from the possible range of vehicle mass. δ is therefore related to the measured braking distances necessary for determining the braking performance (δ = f(V, Te, stopping distance)).
    10. The limits prescribed for minimum performance are those laid down hereunder for each category of vehicle; the vehicle shall satisfy both the prescribed stopping distance and the prescribed mean fully developed deceleration for the relevant vehicle category, but it may not be necessary to measure both parameters.’;